The largest job portal in the Middle East
Apply now, over 12,000 jobs available

Showing 31 to 60 of 458 Entries
img

Project Manager

More Details

Estimating Management, Project Management Planning, Cost Management, Time Management, Quality Management, Contract Administration, Safety Management, which includes specific activities like defining the responsibilities and management structure of the project management team, organizing and leading by implementing project controls, defining roles and responsibilities and developing communication protocols, and identifying elements of project design and construction likely to give rise to disputes and claims

img

Other

More Details

Proposals & Application Engineer

1) Review RFQ documents received from Sales. Give inputs to the Bid/No-Bid decision for an opportunity.
2) Come out with the overall solution for the opportunity.
3) Carry out detailed BOQ and Scope estimates.
4) Make complete cost tables, including Rockwell Hardware & Software, 3rd Party Bought Outs, Project Management & Engineering MH calculations, Agent Commissions/Partnering Fees, etc.
5) Initiate internal approval process for Technical, Cost & Margin approvals from management. Be a part of the approval meetings with various stake-holders.
6) Be a part of Customer Meetings to close Technical Points (TQ).
7) Interface with Sales and Legal/Contracts department for Terms & Conditions.
8) Provide Sales Support in the form of meetings, presentation & exhibitions.
9) Review Purchase Orders & initiate order booking with commercial.
10) Project Handover to Operations.

img

Other

More Details

Land Survey Supervisor Construction
Egypt/ competitive package + Benefits
Geodetic Engineering graduates with minimum 5 years of experience in preparation, supervision and maintenance of sketches, maps, charts, plots and reports related to surveys, verifying accuracy of survey data, including measurements and calculations conducted. You should have excellent knowledge of Survey Objectives Analysis, Survey proposal preparation, Training of assistants.

img

Project Engineer

More Details

Project Engineer - Piling, Shoring for Building projects
Abu Dhabi /AED 12000 20000 Gross + Annual Benefits
A leading Multinational Piling contracting company in Abu Dhabi is looking for the above positions.
Civil Engineering with 5-8 years experience in Piling, Shoring, piling and diaphragm wall experience are mandatory.
Candidates currently based in UAE need apply!

img

Design Engineer

More Details


Design Engineer- E&I
Abu DHABI /AED 18000 + Benefits
A leading EPC Oil and Gas contracting company in Abu Dhabi is looking for a Design Engineer.
Graduates in Electrical and Instrumentation Engineering with at least 10 years experience in Oil & Gas with 5+ years experience in an Engineering and Construction industry are preferred.
Candidates currently based in UAE need apply!

img

Other

More Details

SENIOR PIPING/MECHANICAL ENGINEER.

1. Member of Project team as Mechanical Engineer, reporting to the Lead Mechanical Engineer
2. Provide Static equipment and piping expertise to the Project from Detailed Engineering, Procurement, Installation & Commissioning phases.
3. Safeguard Company technical & contractual interests with respect to all Static and Piping Engineering and Procurement activities.
4. Assist the Lead Mechanical Engineer for liaison with Functional support teams within on Static and Piping technical issues. If required engage the Function for technical and/or Corporate advise.
5. Working with the Detailed Design & Procurement Contractor to ensure that Project, Company, and Group engineering standards are intelligently applied and adhered to by reviewing the technical specification and other engineering documents and drawings prepared by Detailed Design & Procurement Contractor.
6. Participate in all key design, operability and maintainability reviews (Design Review, Hazop, PDMS Model Reviews, Mechanical Handling Study etc.) and ensure timely close out of all review action items related to mechanical engineering.
7. Review and approve technical specification during Detailed Design & Procurement contract. Ensure that the Engineering and Operations & Maintenance aspects of the Project requirements are reflected in the Detailed Design & Procurement Contract enquiry specification.
8. Perform periodic/frequent short visits to project construction sites during the design, construction and commissioning phases to provide support.
9. Focus on enabling the Asset Teams to meet their Business objectives and further promote improvement in Production and Cost performance.
10. Support a very challenging EOR project with exposure to new technology and manufacturers across the globe. Working with the OR& A Team on a Flawless Start up methodology to enhance the project robustness is an added advantage.

img

Civil Structural Engineer

More Details

CIVIL STRUCTURAL ENGINEER WITH 5 YEARS EXPERIENCE + G+4 APPROVAL FROM DM

Duties:

1. Preparing reports, designs and drawings.
2. Making calculations about loads and stresses.
3. Selecting appropriate construction materials.
4. Providing technical advice.
5. Obtaining planning and/or building regulations approval.
6. Liaising with relevant professional staff.
7. Monitoring and inspecting work undertaken by contractors.
8. Administering contracts.
9. Managing projects.
10. Inspecting properties to check conditions/foundations.

img

Structural Engineer

More Details

1. Analyzing configurations of the basic structural components of a building or other structure.
2. Calculating the pressures, stresses and strains that each component, such as a beam or lintel, will experience from other parts of the structure due to human use or environmental pressures such as weather or earthquakes.
3. Considering the strength of various materials, e.g. timber, concrete, steel and brick, to see how their inclusion may necessitate a change of structural design.
4. Liaising with other designers, including architects, to agree on safe designs and their fit with the aesthetic concept of the construction.
5. Examining structures at risk of collapse and advising how to improve their structural integrity, such as recommending removal or repair of defective parts or rebuilding the entire structure.
6. Making drawings, specifications and computer models of structures for building contractors.
7. Working with geotechnical engineers to investigate ground conditions and analyse results of soil sample and in situ tests.
8. Liaising with construction contractors to ensure that newly erected buildings are structurally sound.
9. Applying expert knowledge of the forces that act on various structures.
10. Using computers and computer-aided design (CAD) technology for simulation purposes.

img

Architect

More Details

1. Discussing the objectives, requirements and budget of a project.
2. Consulting with other professionals about design.
3. Preparing and presenting feasibility reports and design proposals to the client.
4. Advising the client on the practicality of their project.
5. Using IT in design and project management, specifically using computer-aided design software.
6. Keeping within financial budgets and deadlines.
7. Producing detailed workings, drawings and specifications.
8. Specifying the nature and quality of materials required.
9. Preparing tender applications and presentations.
10. Negotiating with contractors and other professionals.
11. Preparing applications for planning and building control departments.
12. Drawing up tender documents for contracts.
13. Project managing and helping to coordinate the work of contractors.
14. Controlling a project from start to finish.
15. Regular site visits to check on progress, ensuring that the project is running on time and to budget.
16. Resolving problems and issues that arise during construction.
17. Ensuring that the environmental impact of the project is managed.

img

Technical Engineer

More Details


Job Title: Technical Sales & Service Engineer.
Reporting To: Area Manager
Location: Dubai

1. After an intensive and efficient technical training at our headquarter in Germany the ideal candidate will be focused on sales of spare parts and other service related products (incl. service packages) in the aftermarket whilst continuing with real service jobs.
2. The service hands-on part will be mainly mechanic/hydraulic tasks. Basic knowledge of electrics/electronics will be needed.
3. The position holder installs the systems at customers site according to the order details and is also responsible to provide training of the user after establishing the system.
4. He sells actively spare parts and coordinates autonomous his aftermarket sales activities.
5. He takes charge of the 24-hrs phone hotline for his area also.
6. He must bring along the willingness to travel 80-95% of his working time and will be travelling regionally but internationally as well. Regionally means GCC region, incl. KSA.
7. Fair duties belong to his tasks as well.


img

3D Artist

More Details

Tanzanian electrical contractor, CSI Electrical Limited, has a vacancy, based in Dar es Salaam, for a an experienced MEP BIM modeler to join an expanding team to work on its exciting projects. This fantastic role involves working as the principal member of a dedicated BIM team creating Models and drawings of high profile projects. The role will also involve providing BIM training to a junior team of Tanzanian CAD technicians. The candidate will be one of the first BIM modelers to work in Tanzania and will work on high profile projects including airports, mosques and luxury hotels. The ideal candidate should have a background from MEP services and be flexible, dynamic and have a creative eye. Production of drawings will be done using Autocad and Revit and also familiarity with Navisworks will be useful. This is an excellent opportunity to progress a career practicing BIM as part of a company which values the diversity of their people, encourages personal growth and prides themselves as a great place to work and grow.

The salary package for this role will be commensurate on experience but in the region $30-40,000 per annum nett of all taxes. Local living expenses will be provided by the employer as will shared accommodation, shared vehicle, medical (repatriation) insurance.
The contract is at this stage anticipated to run for a minimum of two years and return flights to home country will be provided every 6 months. Leave will be 28 days per annum split into two 14 day periods.

img

Mechanical Design Engineer

More Details

Progressive Engineering Consultants is an Architectural and Engineering Consultancy company based in the UAE with a tie-up with a leading US company, and lead by a highly experienced team. We are looking to expand our operations in Dubai, and are looking for a highly qualified MEP engineer to join our staff.

The ideal candidate shall have 5 - 7 years of MEP design and drawings experience on a wide variety of projects within the UAE. He/she will be expected to be a self starter and be able to bear the responsibility of the entire MEP design process, starting from inputs in the initial proposal, all the way to detailed design, drawings and calculations. Our company prides itself on offering our clients economical designs and services that surpass our competition. As part of this, our MEP engineer shall be expected to work on challenging designs and drawings deliver them within tight deadlines.

We expect candidates to have the following skills:

1. High level of speed and expertise in AutoCAD.
2. Expert ability in industry standard MEP software.
3. Strong communication skills in order to communicate with other architects and engineers to efficiently resolve design issues.
4. High level of familiarity with Dubai Municipality rules and regulations, and the ability to go to the Dubai Municipality for discussions and clarification of MEP points.
5. A strong practical working knowledge of MEP to enable solving of problems that may arise at site during construction.

img

Structural Engineer

More Details


Progressive Engineering Consultants is an Architectural and Engineering Consultancy company based in the UAE with a tie-up with a leading US company, and lead by a highly experienced team. We are looking to expand our operations in Dubai, and are looking for a highly qualified structural engineer to join our staff.

The ideal candidate shall have 5 - 7 years of structural design experience on a wide variety of projects within the UAE. He/she will be expected to be a self starter and be able to bear the responsibility of the entire structural engineering process, starting from inputs in the initial proposal to all the way to detailed design, drawings and calculations. Our company prides itself on offering our clients economical and strong structural designs and services that surpass our competition. As part of this, our structural engineer shall be expected to work on challenging designs and deliver them within tight deadlines.

We expect candidates to have the following skills:

1. High level of speed and expertise in AutoCAD.
2. Expert ability in industry standard structural engineering software such as ETABS, STAAD, etc.
3. Strong knowledge to design by hand in case of any particular problem.
4. Should be aware of all the BS Codes and local structural design rules & regulations.
5. Strong communication skills in order to communicate with other architects and engineers to efficiently resolve design issues.
6. High level of familiarity with Dubai Municipality rules and regulations, and the ability to go to the Dubai Municipality for discussions and clarification of structural points.
7. A strong practical working knowledge of structures to enable solving of problems that may arise at site during construction.

img

General Manager

More Details

Duties and Responsibilities of the UNIT HEAD will be:
Define and implement business strategy in consultation with CEO
Revenue, net profit, project management and business excellence
Define strategy and business metrics for product line
Lead, direct and review the overall operations
Supervise process and service quality improvement initiatives
Assist in new customer acquisition and relationships
Approve tenders, estimates and final pricing for all clients
Ensure client satisfaction, repeat sales and expanding share-of-wallet
Endorse and submit plans for new products and service offerings to CEO for final approval
Benchmark practices and quality norms e.g. Six Sigma
Define service quality levels and business excellence processes
Review and monitor customer satisfaction and oversee issue resolution at key client locations
Prepare and submit routine reports to CEO on divisional performance
Create a leadership pipeline and partner
Champion customer-centric work styles and approaches

img

Structural Engineer

More Details


Applicant must have passed the Dubai Municipality Test for Building G+12, with minimum 5 years experience in structural design, and with experience in supervision.

To hold the position of "Structural Designer and Project Manager".

img

Architect

More Details

Taylor Scott International is currently looking for Senior Infrastructure Architect for our Dubai operations with the following skill set and terms and conditions:
Skill Set required:
At least 7 to 10 years related onsite experience
At least 5 years of experience in infrastructure consultancy and design of complex distributed systems environments, including failover techniques, recovery/rollback, and application partitioning with strong Unix or Linux and Storage skills Work experience involving technical consulting, solution design, project envisioning, planning, development, and deployment.
Experience writing technical documentation and contributing to proposals
Responsibilities:

img

Architectural Job Captain

More Details

The following positions are available at FOMA ENTREPRISE for ocuppation.
Do not contact us if you dont find the category listed below.
MAJOR POSITIONS
Civil Engineers
Electrial Engineers
6G WELDERS
Also available are
Mason
Carpenter
Plumber
Labour
Welder
Painter
Polisher
Aluminum
Carpenter
Fixer

img

Application Engineer

More Details

The following positions are available at FOMA ENTREPRISE for ocuppation.
Do not contact us if you dont find the category listed below.
MAJOR POSITIONS
Civil Engineers
Electrial Engineers
6G WELDERS
Also available are
Mason
Carpenter
Plumber
Labour
Welder
Painter
Polisher
Aluminum
Carpenter
Fixer

img

Civil Project Engineer

More Details

The following positions are available at FOMA ENTREPRISE for ocuppation.
Do not contact us if you dont find the category listed below.
MAJOR POSITIONS
Civil Engineers
Electrial Engineers
6G WELDERS
Also available are
Mason
Carpenter
Plumber
Labour
Welder
Painter
Polisher
Aluminum
Carpenter
Fixer

img

Senior Project Manager

More Details

Establishes and maintains harmonious business relationship with clients.
Submits regular progress reports to keep the clients well-informed.
Develops business contacts and generate new business projects for the company.
Promote client relations at the site, and identify opportunities for up sell of services.
Be involved in, review and approve MEP and MEP infrastructure designs. Overseeing plan, design/engineering /coordination and implementation/production of respective projects from concept design to handover.
Design and/or survey of building MEP projects and installations, either new-build or refurbishment.
Proactively ensure that all design Consultants are managed with best practices in value engineering and risk management.
Should have excellent working knowledge of MEP systems such as Electrical Power & Lighting with distribution of MV & LV, ELV, HVAC, Plumbing, Drainage, GAS, Fire Protection and Fire Fighting and Fire Alarm systems with in-depth proficiency and hands-on experience in either HVAC design or Electrical design as relates to commercial and industrial building services.
To carry out the design and drawings review and provide leadership and guidance ensuring their optimization and full compliance with the contract requirements including local regulations / practices /laws.
Review specifications and provide technical clearance to subordinates such as Electrical and Mechanical designers and CAD operators, etc. Monitor and manage CAD operators output quality and timely delivery.
Produce sufficient data for Variation Orders and timely communicate to client in coordination with Senior Management/Contract/Estimation and Design teams.
Correspond and writing of clear, concise and pointed reports for Clients encompassing the stage task for which report required (being written). These could be for explaining concept, reporting on Schematics or Final Developed Design or could be a simple narrative to compare two alternative systems.

img

Civil Structural Engineer

More Details

Civil/Structural engineering calculations.
Civil/Structural engineering plans, design, and layout.
Civil/Structural project specifications.
Civil/Structural engineering portion of project proposals.
Civil/Structural engineering portion of project cost estimates.

img

HR

More Details


1. Applicant should be an Arab National
2. Fluency in English (written & Verbal)
3. Excellent computer skills
4. Experience in all HR functions

img

Quality Control Engineer

More Details


Quality engineers monitor and audit the quality of all manufactured goods in a variety of industries, including the automobile, textile, clothing, food and electronics industries. They work to not only find defects, but also to find the cause of the defect and develop a solution

img

Welder

More Details


1. Operating safety working equipments and applying safety practice at work while performing his/her duties.

2. Welding spare parts in various directions: flat, horizontal, vertical or overhead, etc.

3. Igniting flame or striking an arc while welding or performing other electricity-related work to weld part of a metal structure.

4. Supervising and identifying any fault in operating the equipment or in relation to any material or equipment, then notifying the supervisors.

5. Clamping, holding, tack-welding, heat-bending, bolting, or grinding spare parts as necessary to satisfy the technical requirements and create a welded final product.

6. Operating other accessory equipments and performing some tasks necessary for welding metal, such as fusing metal segments, using gas tungsten arc, metal arc, flux-cored arc, plasma arc, and other types of welding arcs.

7. Control the processes of fitting, burning and welding to avoid problems in relation to overheat, distortion, expansion or shrink of spare parts.

8. Examining finish products and spare parts and comparing them with samples to check whether the specifications are met.

9. Being in charge of preparing and setting up necessary tools and equipments for welding job such as shielded metal arc, gas metal arc or other welding equipments.

10. Arranging and assuring the welded parts to be arranged in order before being assembled into final products; Using such tools as square, caliper or ruler for this task.

img

Mechanical Engineer

More Details


Job Duties will include:-

1) Read and interpret blueprints, technical drawings, schematics, and computer-generated reports.

2) Confer with engineers and other personnel to implement operating procedures, resolve system malfunctions, and provide technical information.

3) Research and analyze customer design proposals, specifications, manuals, and other data to evaluate the feasibility, cost, and maintenance requirements of designs or applications.

4) Specify system components or direct modification of products to ensure conformance with engineering design and performance specifications.

5) Research, design, evaluate, install, operate, and maintain mechanical products, equipment, systems and processes to meet requirements, applying knowledge of engineering principles.

6) Investigate equipment failures and difficulties to diagnose faulty operation, and to make recommendations to maintenance crew.

img

Engineer

More Details

We are looking for a B.Se Degree in Mechanical Engineering.

Expert in Maintenance of Central HVAC Units and troubleshooting for all types of A/C types..With a Bachelors degree in Mechanical Engineering, an individual could focus on standard duties whereas with this degree and additional specialized education, the same person would have the opportunity to move into advanced disciplines or work a combination of the two. In either case, mechanical engineering is a complex, challenging, and reward career opportunity worth the time it takes to earn the appropriate degree.

img

Business Analyst

More Details

Job Duties may include:-

1. Develop business use cases and screen mockups describing the business processes and expected functional experience.
2. In each business area become knowledgeable of the document management requirements
3. Work with the Sharepoint governance model to ensure that governance policies and procedures are used.
4. Create business and technical requirements documentation that developers can use to create applications that support the functional, technical and visual requirements, conduct analysis of the existing system.
5. For each request, conduct (create, review and obtain approval) a detailed feasibility study to determine alternatives and associated costs, risks, benefits, timing, etc.
6. Liase with other technical areas in IT Services to ensure that non-functional requirements are captured, formulate solution alternatives that fit in with our current infrastructure, and ensure their buy-in to the proposed solutions.
7. Requirements documentation needs to be precises, logical in layout, capture the expected user experience, identify mock screens, list required input validations, identify security structure, and create a list of unit/functional tests to be performed.
8. Coordinate diverse groups who contribute to business requirements and build consensus for requirements across the various user groups.
9. Assist with DEV/QA/UA testing.
10. Create a uniform style and language for user documentation and internal documents
11. Prepare detailed project documentation according to client standards and appropriate approvals are obtained in a timely manner.
12. Ensure the project follows the clients ITS Project Management Methodology.
13. Keep the Project Manager informed of ongoing activities and any usual circumstances.
14. Other technical writing services on othe projects where availability permits.

img

Project Manager

Estimating Management, Project Management Planning, Cost Management, Time Management, Quality Management, Contract Administration, Safety Management, which includes specific activities like defining the responsibilities and management structure of the project management team, organizing and leading by implementing project controls, defining roles and responsibilities and developing communication protocols, and identifying elements of project design and construction likely to give rise to disputes and claims

img

Other

Proposals & Application Engineer

1) Review RFQ documents received from Sales. Give inputs to the Bid/No-Bid decision for an opportunity.
2) Come out with the overall solution for the opportunity.
3) Carry out detailed BOQ and Scope estimates.
4) Make complete cost tables, including Rockwell Hardware & Software, 3rd Party Bought Outs, Project Management & Engineering MH calculations, Agent Commissions/Partnering Fees, etc.
5) Initiate internal approval process for Technical, Cost & Margin approvals from management. Be a part of the approval meetings with various stake-holders.
6) Be a part of Customer Meetings to close Technical Points (TQ).
7) Interface with Sales and Legal/Contracts department for Terms & Conditions.
8) Provide Sales Support in the form of meetings, presentation & exhibitions.
9) Review Purchase Orders & initiate order booking with commercial.
10) Project Handover to Operations.

img

Other

Land Survey Supervisor Construction
Egypt/ competitive package + Benefits
Geodetic Engineering graduates with minimum 5 years of experience in preparation, supervision and maintenance of sketches, maps, charts, plots and reports related to surveys, verifying accuracy of survey data, including measurements and calculations conducted. You should have excellent knowledge of Survey Objectives Analysis, Survey proposal preparation, Training of assistants.

img

Project Engineer

Project Engineer - Piling, Shoring for Building projects
Abu Dhabi /AED 12000 20000 Gross + Annual Benefits
A leading Multinational Piling contracting company in Abu Dhabi is looking for the above positions.
Civil Engineering with 5-8 years experience in Piling, Shoring, piling and diaphragm wall experience are mandatory.
Candidates currently based in UAE need apply!

img

Design Engineer


Design Engineer- E&I
Abu DHABI /AED 18000 + Benefits
A leading EPC Oil and Gas contracting company in Abu Dhabi is looking for a Design Engineer.
Graduates in Electrical and Instrumentation Engineering with at least 10 years experience in Oil & Gas with 5+ years experience in an Engineering and Construction industry are preferred.
Candidates currently based in UAE need apply!

img

Other

SENIOR PIPING/MECHANICAL ENGINEER.

1. Member of Project team as Mechanical Engineer, reporting to the Lead Mechanical Engineer
2. Provide Static equipment and piping expertise to the Project from Detailed Engineering, Procurement, Installation & Commissioning phases.
3. Safeguard Company technical & contractual interests with respect to all Static and Piping Engineering and Procurement activities.
4. Assist the Lead Mechanical Engineer for liaison with Functional support teams within on Static and Piping technical issues. If required engage the Function for technical and/or Corporate advise.
5. Working with the Detailed Design & Procurement Contractor to ensure that Project, Company, and Group engineering standards are intelligently applied and adhered to by reviewing the technical specification and other engineering documents and drawings prepared by Detailed Design & Procurement Contractor.
6. Participate in all key design, operability and maintainability reviews (Design Review, Hazop, PDMS Model Reviews, Mechanical Handling Study etc.) and ensure timely close out of all review action items related to mechanical engineering.
7. Review and approve technical specification during Detailed Design & Procurement contract. Ensure that the Engineering and Operations & Maintenance aspects of the Project requirements are reflected in the Detailed Design & Procurement Contract enquiry specification.
8. Perform periodic/frequent short visits to project construction sites during the design, construction and commissioning phases to provide support.
9. Focus on enabling the Asset Teams to meet their Business objectives and further promote improvement in Production and Cost performance.
10. Support a very challenging EOR project with exposure to new technology and manufacturers across the globe. Working with the OR& A Team on a Flawless Start up methodology to enhance the project robustness is an added advantage.

img

Civil Structural Engineer

CIVIL STRUCTURAL ENGINEER WITH 5 YEARS EXPERIENCE + G+4 APPROVAL FROM DM

Duties:

1. Preparing reports, designs and drawings.
2. Making calculations about loads and stresses.
3. Selecting appropriate construction materials.
4. Providing technical advice.
5. Obtaining planning and/or building regulations approval.
6. Liaising with relevant professional staff.
7. Monitoring and inspecting work undertaken by contractors.
8. Administering contracts.
9. Managing projects.
10. Inspecting properties to check conditions/foundations.

img

Structural Engineer

1. Analyzing configurations of the basic structural components of a building or other structure.
2. Calculating the pressures, stresses and strains that each component, such as a beam or lintel, will experience from other parts of the structure due to human use or environmental pressures such as weather or earthquakes.
3. Considering the strength of various materials, e.g. timber, concrete, steel and brick, to see how their inclusion may necessitate a change of structural design.
4. Liaising with other designers, including architects, to agree on safe designs and their fit with the aesthetic concept of the construction.
5. Examining structures at risk of collapse and advising how to improve their structural integrity, such as recommending removal or repair of defective parts or rebuilding the entire structure.
6. Making drawings, specifications and computer models of structures for building contractors.
7. Working with geotechnical engineers to investigate ground conditions and analyse results of soil sample and in situ tests.
8. Liaising with construction contractors to ensure that newly erected buildings are structurally sound.
9. Applying expert knowledge of the forces that act on various structures.
10. Using computers and computer-aided design (CAD) technology for simulation purposes.

img

Architect

1. Discussing the objectives, requirements and budget of a project.
2. Consulting with other professionals about design.
3. Preparing and presenting feasibility reports and design proposals to the client.
4. Advising the client on the practicality of their project.
5. Using IT in design and project management, specifically using computer-aided design software.
6. Keeping within financial budgets and deadlines.
7. Producing detailed workings, drawings and specifications.
8. Specifying the nature and quality of materials required.
9. Preparing tender applications and presentations.
10. Negotiating with contractors and other professionals.
11. Preparing applications for planning and building control departments.
12. Drawing up tender documents for contracts.
13. Project managing and helping to coordinate the work of contractors.
14. Controlling a project from start to finish.
15. Regular site visits to check on progress, ensuring that the project is running on time and to budget.
16. Resolving problems and issues that arise during construction.
17. Ensuring that the environmental impact of the project is managed.

img

Technical Engineer


Job Title: Technical Sales & Service Engineer.
Reporting To: Area Manager
Location: Dubai

1. After an intensive and efficient technical training at our headquarter in Germany the ideal candidate will be focused on sales of spare parts and other service related products (incl. service packages) in the aftermarket whilst continuing with real service jobs.
2. The service hands-on part will be mainly mechanic/hydraulic tasks. Basic knowledge of electrics/electronics will be needed.
3. The position holder installs the systems at customers site according to the order details and is also responsible to provide training of the user after establishing the system.
4. He sells actively spare parts and coordinates autonomous his aftermarket sales activities.
5. He takes charge of the 24-hrs phone hotline for his area also.
6. He must bring along the willingness to travel 80-95% of his working time and will be travelling regionally but internationally as well. Regionally means GCC region, incl. KSA.
7. Fair duties belong to his tasks as well.


img

3D Artist

Tanzanian electrical contractor, CSI Electrical Limited, has a vacancy, based in Dar es Salaam, for a an experienced MEP BIM modeler to join an expanding team to work on its exciting projects. This fantastic role involves working as the principal member of a dedicated BIM team creating Models and drawings of high profile projects. The role will also involve providing BIM training to a junior team of Tanzanian CAD technicians. The candidate will be one of the first BIM modelers to work in Tanzania and will work on high profile projects including airports, mosques and luxury hotels. The ideal candidate should have a background from MEP services and be flexible, dynamic and have a creative eye. Production of drawings will be done using Autocad and Revit and also familiarity with Navisworks will be useful. This is an excellent opportunity to progress a career practicing BIM as part of a company which values the diversity of their people, encourages personal growth and prides themselves as a great place to work and grow.

The salary package for this role will be commensurate on experience but in the region $30-40,000 per annum nett of all taxes. Local living expenses will be provided by the employer as will shared accommodation, shared vehicle, medical (repatriation) insurance.
The contract is at this stage anticipated to run for a minimum of two years and return flights to home country will be provided every 6 months. Leave will be 28 days per annum split into two 14 day periods.

img

Mechanical Design Engineer

Progressive Engineering Consultants is an Architectural and Engineering Consultancy company based in the UAE with a tie-up with a leading US company, and lead by a highly experienced team. We are looking to expand our operations in Dubai, and are looking for a highly qualified MEP engineer to join our staff.

The ideal candidate shall have 5 - 7 years of MEP design and drawings experience on a wide variety of projects within the UAE. He/she will be expected to be a self starter and be able to bear the responsibility of the entire MEP design process, starting from inputs in the initial proposal, all the way to detailed design, drawings and calculations. Our company prides itself on offering our clients economical designs and services that surpass our competition. As part of this, our MEP engineer shall be expected to work on challenging designs and drawings deliver them within tight deadlines.

We expect candidates to have the following skills:

1. High level of speed and expertise in AutoCAD.
2. Expert ability in industry standard MEP software.
3. Strong communication skills in order to communicate with other architects and engineers to efficiently resolve design issues.
4. High level of familiarity with Dubai Municipality rules and regulations, and the ability to go to the Dubai Municipality for discussions and clarification of MEP points.
5. A strong practical working knowledge of MEP to enable solving of problems that may arise at site during construction.

img

Structural Engineer


Progressive Engineering Consultants is an Architectural and Engineering Consultancy company based in the UAE with a tie-up with a leading US company, and lead by a highly experienced team. We are looking to expand our operations in Dubai, and are looking for a highly qualified structural engineer to join our staff.

The ideal candidate shall have 5 - 7 years of structural design experience on a wide variety of projects within the UAE. He/she will be expected to be a self starter and be able to bear the responsibility of the entire structural engineering process, starting from inputs in the initial proposal to all the way to detailed design, drawings and calculations. Our company prides itself on offering our clients economical and strong structural designs and services that surpass our competition. As part of this, our structural engineer shall be expected to work on challenging designs and deliver them within tight deadlines.

We expect candidates to have the following skills:

1. High level of speed and expertise in AutoCAD.
2. Expert ability in industry standard structural engineering software such as ETABS, STAAD, etc.
3. Strong knowledge to design by hand in case of any particular problem.
4. Should be aware of all the BS Codes and local structural design rules & regulations.
5. Strong communication skills in order to communicate with other architects and engineers to efficiently resolve design issues.
6. High level of familiarity with Dubai Municipality rules and regulations, and the ability to go to the Dubai Municipality for discussions and clarification of structural points.
7. A strong practical working knowledge of structures to enable solving of problems that may arise at site during construction.

img

General Manager

Duties and Responsibilities of the UNIT HEAD will be:
Define and implement business strategy in consultation with CEO
Revenue, net profit, project management and business excellence
Define strategy and business metrics for product line
Lead, direct and review the overall operations
Supervise process and service quality improvement initiatives
Assist in new customer acquisition and relationships
Approve tenders, estimates and final pricing for all clients
Ensure client satisfaction, repeat sales and expanding share-of-wallet
Endorse and submit plans for new products and service offerings to CEO for final approval
Benchmark practices and quality norms e.g. Six Sigma
Define service quality levels and business excellence processes
Review and monitor customer satisfaction and oversee issue resolution at key client locations
Prepare and submit routine reports to CEO on divisional performance
Create a leadership pipeline and partner
Champion customer-centric work styles and approaches

img

Structural Engineer


Applicant must have passed the Dubai Municipality Test for Building G+12, with minimum 5 years experience in structural design, and with experience in supervision.

To hold the position of "Structural Designer and Project Manager".

img

Architect

Taylor Scott International is currently looking for Senior Infrastructure Architect for our Dubai operations with the following skill set and terms and conditions:
Skill Set required:
At least 7 to 10 years related onsite experience
At least 5 years of experience in infrastructure consultancy and design of complex distributed systems environments, including failover techniques, recovery/rollback, and application partitioning with strong Unix or Linux and Storage skills Work experience involving technical consulting, solution design, project envisioning, planning, development, and deployment.
Experience writing technical documentation and contributing to proposals
Responsibilities:

img

Architectural Job Captain

The following positions are available at FOMA ENTREPRISE for ocuppation.
Do not contact us if you dont find the category listed below.
MAJOR POSITIONS
Civil Engineers
Electrial Engineers
6G WELDERS
Also available are
Mason
Carpenter
Plumber
Labour
Welder
Painter
Polisher
Aluminum
Carpenter
Fixer

img

Application Engineer

The following positions are available at FOMA ENTREPRISE for ocuppation.
Do not contact us if you dont find the category listed below.
MAJOR POSITIONS
Civil Engineers
Electrial Engineers
6G WELDERS
Also available are
Mason
Carpenter
Plumber
Labour
Welder
Painter
Polisher
Aluminum
Carpenter
Fixer

img

Civil Project Engineer

The following positions are available at FOMA ENTREPRISE for ocuppation.
Do not contact us if you dont find the category listed below.
MAJOR POSITIONS
Civil Engineers
Electrial Engineers
6G WELDERS
Also available are
Mason
Carpenter
Plumber
Labour
Welder
Painter
Polisher
Aluminum
Carpenter
Fixer

img

Senior Project Manager

Establishes and maintains harmonious business relationship with clients.
Submits regular progress reports to keep the clients well-informed.
Develops business contacts and generate new business projects for the company.
Promote client relations at the site, and identify opportunities for up sell of services.
Be involved in, review and approve MEP and MEP infrastructure designs. Overseeing plan, design/engineering /coordination and implementation/production of respective projects from concept design to handover.
Design and/or survey of building MEP projects and installations, either new-build or refurbishment.
Proactively ensure that all design Consultants are managed with best practices in value engineering and risk management.
Should have excellent working knowledge of MEP systems such as Electrical Power & Lighting with distribution of MV & LV, ELV, HVAC, Plumbing, Drainage, GAS, Fire Protection and Fire Fighting and Fire Alarm systems with in-depth proficiency and hands-on experience in either HVAC design or Electrical design as relates to commercial and industrial building services.
To carry out the design and drawings review and provide leadership and guidance ensuring their optimization and full compliance with the contract requirements including local regulations / practices /laws.
Review specifications and provide technical clearance to subordinates such as Electrical and Mechanical designers and CAD operators, etc. Monitor and manage CAD operators output quality and timely delivery.
Produce sufficient data for Variation Orders and timely communicate to client in coordination with Senior Management/Contract/Estimation and Design teams.
Correspond and writing of clear, concise and pointed reports for Clients encompassing the stage task for which report required (being written). These could be for explaining concept, reporting on Schematics or Final Developed Design or could be a simple narrative to compare two alternative systems.

img

Civil Structural Engineer

Civil/Structural engineering calculations.
Civil/Structural engineering plans, design, and layout.
Civil/Structural project specifications.
Civil/Structural engineering portion of project proposals.
Civil/Structural engineering portion of project cost estimates.

img

HR


1. Applicant should be an Arab National
2. Fluency in English (written & Verbal)
3. Excellent computer skills
4. Experience in all HR functions

img

Quality Control Engineer


Quality engineers monitor and audit the quality of all manufactured goods in a variety of industries, including the automobile, textile, clothing, food and electronics industries. They work to not only find defects, but also to find the cause of the defect and develop a solution

img

Welder


1. Operating safety working equipments and applying safety practice at work while performing his/her duties.

2. Welding spare parts in various directions: flat, horizontal, vertical or overhead, etc.

3. Igniting flame or striking an arc while welding or performing other electricity-related work to weld part of a metal structure.

4. Supervising and identifying any fault in operating the equipment or in relation to any material or equipment, then notifying the supervisors.

5. Clamping, holding, tack-welding, heat-bending, bolting, or grinding spare parts as necessary to satisfy the technical requirements and create a welded final product.

6. Operating other accessory equipments and performing some tasks necessary for welding metal, such as fusing metal segments, using gas tungsten arc, metal arc, flux-cored arc, plasma arc, and other types of welding arcs.

7. Control the processes of fitting, burning and welding to avoid problems in relation to overheat, distortion, expansion or shrink of spare parts.

8. Examining finish products and spare parts and comparing them with samples to check whether the specifications are met.

9. Being in charge of preparing and setting up necessary tools and equipments for welding job such as shielded metal arc, gas metal arc or other welding equipments.

10. Arranging and assuring the welded parts to be arranged in order before being assembled into final products; Using such tools as square, caliper or ruler for this task.

img

Mechanical Engineer


Job Duties will include:-

1) Read and interpret blueprints, technical drawings, schematics, and computer-generated reports.

2) Confer with engineers and other personnel to implement operating procedures, resolve system malfunctions, and provide technical information.

3) Research and analyze customer design proposals, specifications, manuals, and other data to evaluate the feasibility, cost, and maintenance requirements of designs or applications.

4) Specify system components or direct modification of products to ensure conformance with engineering design and performance specifications.

5) Research, design, evaluate, install, operate, and maintain mechanical products, equipment, systems and processes to meet requirements, applying knowledge of engineering principles.

6) Investigate equipment failures and difficulties to diagnose faulty operation, and to make recommendations to maintenance crew.

img

Engineer

We are looking for a B.Se Degree in Mechanical Engineering.

Expert in Maintenance of Central HVAC Units and troubleshooting for all types of A/C types..With a Bachelors degree in Mechanical Engineering, an individual could focus on standard duties whereas with this degree and additional specialized education, the same person would have the opportunity to move into advanced disciplines or work a combination of the two. In either case, mechanical engineering is a complex, challenging, and reward career opportunity worth the time it takes to earn the appropriate degree.

img

Business Analyst

Job Duties may include:-

1. Develop business use cases and screen mockups describing the business processes and expected functional experience.
2. In each business area become knowledgeable of the document management requirements
3. Work with the Sharepoint governance model to ensure that governance policies and procedures are used.
4. Create business and technical requirements documentation that developers can use to create applications that support the functional, technical and visual requirements, conduct analysis of the existing system.
5. For each request, conduct (create, review and obtain approval) a detailed feasibility study to determine alternatives and associated costs, risks, benefits, timing, etc.
6. Liase with other technical areas in IT Services to ensure that non-functional requirements are captured, formulate solution alternatives that fit in with our current infrastructure, and ensure their buy-in to the proposed solutions.
7. Requirements documentation needs to be precises, logical in layout, capture the expected user experience, identify mock screens, list required input validations, identify security structure, and create a list of unit/functional tests to be performed.
8. Coordinate diverse groups who contribute to business requirements and build consensus for requirements across the various user groups.
9. Assist with DEV/QA/UA testing.
10. Create a uniform style and language for user documentation and internal documents
11. Prepare detailed project documentation according to client standards and appropriate approvals are obtained in a timely manner.
12. Ensure the project follows the clients ITS Project Management Methodology.
13. Keep the Project Manager informed of ongoing activities and any usual circumstances.
14. Other technical writing services on othe projects where availability permits.