The largest job portal in the Middle East
Apply now, over 12,000 jobs available

Showing 1 to 3 of 3 Entries
img

Mechanical engineer Canada

More Details

The requirements listed below are representative of the knowledge, skill, and/or ability required. • Work within a mechanical engineering team in a multi-disciplinary, time sensitive environment with changing priorities. • Take personal responsibility to assure that client's work is completed on time, on budget, and within the quality standards of the firm. • Collaborate with and support Discipline Leads, and Project Managers to meet all technical aspects of assigned projects. • Work within commercial limits as defined for assigned projects • Work with other disciplines and offices within Mott MacDonald. • Participate in training for individuals and the team, in accordance with Group policies. • Working in accordance with companypolicies and developing personal goals and objectives. • Provide supporting data to Discipline Leads to facilitate analyses of activities, costs, and forecast data • Monitor progress on assigned projects. Candidate Specification You will have experience in transit, healthcare, built environment projects. Knowledge of infrastructural projects is an additional asset. Required qualifications: • A minimum of 7 years’ experience with building design and delivery • B.S. Degree in mechanical engineering from a recognized Canadian university, or equivalent in education and experience • Master’s degree or equivalent preferred • PEO license, or eligibility for licensing as an engineer in the Province of Ontario, is required • Experience in design and contract administration of mechanical services on transit projects is required • Experience on healthcare projects is a preferred • Demonstrated local experience in design of mechanical services and systems including: HVAC (heating as well as cooling) load, plant , fixtures and equipment; zoning and occupancy controls; multi-zone VAV with outdoor air cycles; heat reclaim systems; central and local plant configurations; energy efficient plant and fixtures; sustainable design; plumbing • Delivery of design focused on end-to-end total system for operational efficiency; efficient design and layout of back of house spaces, and the like, low-rise and high-rise structures • Strong knowledge of local and national codes and other legislative requirements • LEED certification preferred • Demonstrated ability to work with minimal direct oversight and to deliver projects on-time and budget to the satisfaction of clients • Assuring the quality of deliverables for yourself and the team • Experience in Revit, AutoCad and Heat load calculations software is a must. Keen interest in delivering projects using BIM methods and technology driven solutions • Demonstrated ability to effectively communicate to internal and external stakeholders in a professional manner, both written and verbally • Positive ‘can-do’ attitude, to working with colleagues and clients • Adaptable to working within different client environments/cultures • Excellent interpersonal and teamwork skills in complex and changing environments • Willing and able to travel within the Canada and internationally as required to support projects We are looking for enthusiastic, qualified people to join our dynamic team who wish to make a difference to the world that we live in. If you share our vision, then let’s discuss how we can help you take the next step in your career and how you can participate in an exciting new chapter for Mott MacDonald in North America. Job Profile Opening opportunities with connected thinking. Together with our clients, Mott MacDonald is solving some of the world's most intricate challenges. We search out the connections others fail to make; we unlock creativity and deliver better outcomes for the lives we touch every day. Mott MacDonald is a wholly independent, employee-owned, multidisciplinary engineering and development consultancy servicing public and private sectors around the world with over 16,000 staff working out of 180 principal offices and delivering projects in 150 countries. Every day we build upon our reputation for technical excellence by taking on some of the world’s most prominent and challenging projects, particularly in areas such as highways and bridges, rail and transit systems, tunnels, and pipeline services. We are positioned for healthy growth, profitability, and career opportunities across North America and around the world. As part of our growing business, we want to hear from you: the enthusiastic, collaborative, and talented individuals who enjoy problem solving and pitching in to grow a successful business. Join our team of seasoned professionals who are finding opportunities through connected thinking to develop our Mott MacDonald global presence. Other Information Equality, diversity and inclusion We put equality, diversity and inclusion at the heart of our business, seeking to promote fair employment procedures and practices to ensure equal opportunities for all. We encourage individual expression in our workplace and are committed to creating an inclusive environment where everyone feels they have the opportunity to contribute.

img

Test Engineer Canada

More Details

Role overview – overview of the focal points of this role • We are looking for an experienced, Automation Test Engineer for 5G Solutions who is passionate about advancing the state-of-the-art and about delivering innovative products in networking and routing technologies. You will work on market-leading technologies such as Flexible Ethernet and Segment Routing, in a virtualized, micro-services oriented, container-based system architecture. This is an exciting time to join Ciena, as we aggressively drive our product portfolio forward into the future of advanced networking services. • Establish yourself as a Automation Test Prime for the application of delivering the next generation of applications in 5G xHaul, Synchronization and Timing Solutions, EVPN, Segment Routing and other virtualized network devices • Always continue learning and developing skills in technologies: system and network virtualization (Containers, SDN, NFV), advanced routing, BGP, Segment Routing, EVPN, LDP, MPLS, fast switchover technologies, Ethernet services and more. • Provide detailed implementations for test coverage, automation, validation, and documentation to deliver high quality, functionally excellent products • Work in an agile development environment and participate in sprint activities to plan and produce rapid cycle, high quality deliverables, co-ordinate activities across scrums Why is this role important within Ciena? What impact can you expect to have? • Ciena packet software and hardware technologies are deployed in Global Networks, Private and Public Cloud Solutions, 4G/5G communications, and SD-WAN • Influence the automation methodology and framework for the test organization in the 5G Solution Area. What type of work environment will you be working in? Who are the key teams with whom you will interact? • Partner with peer development scrums and technology leaders to ensure excellent cross-component QA strategy and coverage in various protocols What technical experience and/or professional and personal skills are required for this role? • Requires strong automation programming experience, especially with Python, for testing of networking features in an agile environment. • Understanding of Ethernet (L2) protocols, IP network, Routing Protocols, MPLS, Time-Sensitive Networking (TSN), ethernet and/or packet network time synchronization. • Customer and Quality advocate – be able to review, provide comments and approve Functional specifications, Technical Requirements, Design test plans for high quality product and higher customer satisfaction. • Hands-on member of the team, who can root cause and solve defects, often working with cross-functional teams, software design and automaton framework • Developed skills as an excellent verbal and written communicator • Familiarity with product cycles and deployment journeys for carrier class products in Service Provider customer environments. • Bachelor’s degree or equivalent experience in computer science, engineering, or a related discipline. • LI-JW About Ciena Ciena is a network strategy and technology company with a passion to provide an experience, to you and our customers that is as rewarding as the outcome. We attract the best and brightest– those with outstanding talent, motivation, and the right attitude to contribute to our success. Our culture balances our openness and informality with professionalism and trust and is built on the foundation of our core values: Customer First, Integrity, Velocity, Innovation, and Outstanding People. Ciena enables everyone to have a voice and a network that supports them while on the journey to discovering their passion and purpose. We trust each individual to do what they can to reach their full potential and make an impact on the business, whenever, wherever they are in the world. With Ciena’s highly innovative, forward-thinking business practices, we reward people for pushing the boundaries. Unlock your potential at Ciena!



 

img

Mechanical Engineer Canada

More Details

Develop and design mechanical component parts and assemblies for integration into Mass Spectrometers for future and current products. • Design and deliver a complete work package including CAD modeling, detailed GD&T drawings, tolerance analysis and Bill of Material creation. • Collaborate with engineering and research scientiststo develop theoretical concepts into functional prototypes. • Deliver designs to schedule, accountable for meeting deadlines, following up on outstanding issues and tracking project issues to resolution. • Assist or lead the build of prototype assemblies to test functionality, analyze the ease of assembly, troubleshoot as necessary and summarize results. • Develop, review and release product documentation for parts and assemblies consistent with documentation guidelines. • Work closely with multiple product development groups throughout the product development process (eg Project Management, Systems Engineering, Hardware verification and validation, Manufacturing Engineering, Electrical Engineering). • Provide technical support to released products to improve manufacturing yield, field reliability and/or product cost. • Work within a LeanSixSigma/DFSS framework to improve product designs with an emphasis on product cost, product reliability and design for manufacturability. • Help the team meet and/or exceed project and design goals, including performance, schedules, cost and quality as established in the project plan. QUALIFICATIONS/REQUIREMENTS: • Mechanical Engineering University Degree (or similar) • Minimum of 5 years of design experience. • Demonstrated ability to create CAD models, detailed GD&T drawings, assembly drawings, bills of material and tolerance analysis. • Candidate must be proactive, results-oriented, self-motivated and willing to be part of a larger team working in collaboration with a group of engineers and scientists. • Candidate must have strong organizational skills and excellent written and verbal communication skills. • Ability to discuss basic physics/science concepts is an asset.



 

img

Mechanical engineer Canada

The requirements listed below are representative of the knowledge, skill, and/or ability required. • Work within a mechanical engineering team in a multi-disciplinary, time sensitive environment with changing priorities. • Take personal responsibility to assure that client's work is completed on time, on budget, and within the quality standards of the firm. • Collaborate with and support Discipline Leads, and Project Managers to meet all technical aspects of assigned projects. • Work within commercial limits as defined for assigned projects • Work with other disciplines and offices within Mott MacDonald. • Participate in training for individuals and the team, in accordance with Group policies. • Working in accordance with companypolicies and developing personal goals and objectives. • Provide supporting data to Discipline Leads to facilitate analyses of activities, costs, and forecast data • Monitor progress on assigned projects. Candidate Specification You will have experience in transit, healthcare, built environment projects. Knowledge of infrastructural projects is an additional asset. Required qualifications: • A minimum of 7 years’ experience with building design and delivery • B.S. Degree in mechanical engineering from a recognized Canadian university, or equivalent in education and experience • Master’s degree or equivalent preferred • PEO license, or eligibility for licensing as an engineer in the Province of Ontario, is required • Experience in design and contract administration of mechanical services on transit projects is required • Experience on healthcare projects is a preferred • Demonstrated local experience in design of mechanical services and systems including: HVAC (heating as well as cooling) load, plant , fixtures and equipment; zoning and occupancy controls; multi-zone VAV with outdoor air cycles; heat reclaim systems; central and local plant configurations; energy efficient plant and fixtures; sustainable design; plumbing • Delivery of design focused on end-to-end total system for operational efficiency; efficient design and layout of back of house spaces, and the like, low-rise and high-rise structures • Strong knowledge of local and national codes and other legislative requirements • LEED certification preferred • Demonstrated ability to work with minimal direct oversight and to deliver projects on-time and budget to the satisfaction of clients • Assuring the quality of deliverables for yourself and the team • Experience in Revit, AutoCad and Heat load calculations software is a must. Keen interest in delivering projects using BIM methods and technology driven solutions • Demonstrated ability to effectively communicate to internal and external stakeholders in a professional manner, both written and verbally • Positive ‘can-do’ attitude, to working with colleagues and clients • Adaptable to working within different client environments/cultures • Excellent interpersonal and teamwork skills in complex and changing environments • Willing and able to travel within the Canada and internationally as required to support projects We are looking for enthusiastic, qualified people to join our dynamic team who wish to make a difference to the world that we live in. If you share our vision, then let’s discuss how we can help you take the next step in your career and how you can participate in an exciting new chapter for Mott MacDonald in North America. Job Profile Opening opportunities with connected thinking. Together with our clients, Mott MacDonald is solving some of the world's most intricate challenges. We search out the connections others fail to make; we unlock creativity and deliver better outcomes for the lives we touch every day. Mott MacDonald is a wholly independent, employee-owned, multidisciplinary engineering and development consultancy servicing public and private sectors around the world with over 16,000 staff working out of 180 principal offices and delivering projects in 150 countries. Every day we build upon our reputation for technical excellence by taking on some of the world’s most prominent and challenging projects, particularly in areas such as highways and bridges, rail and transit systems, tunnels, and pipeline services. We are positioned for healthy growth, profitability, and career opportunities across North America and around the world. As part of our growing business, we want to hear from you: the enthusiastic, collaborative, and talented individuals who enjoy problem solving and pitching in to grow a successful business. Join our team of seasoned professionals who are finding opportunities through connected thinking to develop our Mott MacDonald global presence. Other Information Equality, diversity and inclusion We put equality, diversity and inclusion at the heart of our business, seeking to promote fair employment procedures and practices to ensure equal opportunities for all. We encourage individual expression in our workplace and are committed to creating an inclusive environment where everyone feels they have the opportunity to contribute.

img

Test Engineer Canada

Role overview – overview of the focal points of this role • We are looking for an experienced, Automation Test Engineer for 5G Solutions who is passionate about advancing the state-of-the-art and about delivering innovative products in networking and routing technologies. You will work on market-leading technologies such as Flexible Ethernet and Segment Routing, in a virtualized, micro-services oriented, container-based system architecture. This is an exciting time to join Ciena, as we aggressively drive our product portfolio forward into the future of advanced networking services. • Establish yourself as a Automation Test Prime for the application of delivering the next generation of applications in 5G xHaul, Synchronization and Timing Solutions, EVPN, Segment Routing and other virtualized network devices • Always continue learning and developing skills in technologies: system and network virtualization (Containers, SDN, NFV), advanced routing, BGP, Segment Routing, EVPN, LDP, MPLS, fast switchover technologies, Ethernet services and more. • Provide detailed implementations for test coverage, automation, validation, and documentation to deliver high quality, functionally excellent products • Work in an agile development environment and participate in sprint activities to plan and produce rapid cycle, high quality deliverables, co-ordinate activities across scrums Why is this role important within Ciena? What impact can you expect to have? • Ciena packet software and hardware technologies are deployed in Global Networks, Private and Public Cloud Solutions, 4G/5G communications, and SD-WAN • Influence the automation methodology and framework for the test organization in the 5G Solution Area. What type of work environment will you be working in? Who are the key teams with whom you will interact? • Partner with peer development scrums and technology leaders to ensure excellent cross-component QA strategy and coverage in various protocols What technical experience and/or professional and personal skills are required for this role? • Requires strong automation programming experience, especially with Python, for testing of networking features in an agile environment. • Understanding of Ethernet (L2) protocols, IP network, Routing Protocols, MPLS, Time-Sensitive Networking (TSN), ethernet and/or packet network time synchronization. • Customer and Quality advocate – be able to review, provide comments and approve Functional specifications, Technical Requirements, Design test plans for high quality product and higher customer satisfaction. • Hands-on member of the team, who can root cause and solve defects, often working with cross-functional teams, software design and automaton framework • Developed skills as an excellent verbal and written communicator • Familiarity with product cycles and deployment journeys for carrier class products in Service Provider customer environments. • Bachelor’s degree or equivalent experience in computer science, engineering, or a related discipline. • LI-JW About Ciena Ciena is a network strategy and technology company with a passion to provide an experience, to you and our customers that is as rewarding as the outcome. We attract the best and brightest– those with outstanding talent, motivation, and the right attitude to contribute to our success. Our culture balances our openness and informality with professionalism and trust and is built on the foundation of our core values: Customer First, Integrity, Velocity, Innovation, and Outstanding People. Ciena enables everyone to have a voice and a network that supports them while on the journey to discovering their passion and purpose. We trust each individual to do what they can to reach their full potential and make an impact on the business, whenever, wherever they are in the world. With Ciena’s highly innovative, forward-thinking business practices, we reward people for pushing the boundaries. Unlock your potential at Ciena!



 

img

Mechanical Engineer Canada

Develop and design mechanical component parts and assemblies for integration into Mass Spectrometers for future and current products. • Design and deliver a complete work package including CAD modeling, detailed GD&T drawings, tolerance analysis and Bill of Material creation. • Collaborate with engineering and research scientiststo develop theoretical concepts into functional prototypes. • Deliver designs to schedule, accountable for meeting deadlines, following up on outstanding issues and tracking project issues to resolution. • Assist or lead the build of prototype assemblies to test functionality, analyze the ease of assembly, troubleshoot as necessary and summarize results. • Develop, review and release product documentation for parts and assemblies consistent with documentation guidelines. • Work closely with multiple product development groups throughout the product development process (eg Project Management, Systems Engineering, Hardware verification and validation, Manufacturing Engineering, Electrical Engineering). • Provide technical support to released products to improve manufacturing yield, field reliability and/or product cost. • Work within a LeanSixSigma/DFSS framework to improve product designs with an emphasis on product cost, product reliability and design for manufacturability. • Help the team meet and/or exceed project and design goals, including performance, schedules, cost and quality as established in the project plan. QUALIFICATIONS/REQUIREMENTS: • Mechanical Engineering University Degree (or similar) • Minimum of 5 years of design experience. • Demonstrated ability to create CAD models, detailed GD&T drawings, assembly drawings, bills of material and tolerance analysis. • Candidate must be proactive, results-oriented, self-motivated and willing to be part of a larger team working in collaboration with a group of engineers and scientists. • Candidate must have strong organizational skills and excellent written and verbal communication skills. • Ability to discuss basic physics/science concepts is an asset.